Vi använder cookies på våra webbplatser för att förbättra prestandan och din användarupplevelse. Enligt EU-direktiv är vi skyldiga att informera dig om detta.
Skanska i Sverige
Här hittar du information om Skanskas verksamhet i Sverige.
» Skanska Group
» Skanskas webbplatsportal
Olja och gas
Vatten och avlopp
Grus och kross
Offentlig privat samverkan
Building Information Modeling/ Virtual Design & Construction
Skanska has been awarded the prestigious project of renovating and refurbishing the Nationalmuseum in Stockholm. The Nationalmuseum will reopen in 2018, and the public will once again be able to enjoy Northern Europe’s greatest art collection.
This is the first major renovation since the museum was inaugurated in 1866. A number of changes were made in the 1900s, but at the reopening, visitors will be greeted by a Nationalmuseum that, in many ways, has been restored to its original condition.
In the 1960s, the Annexe was added to the museum to make room for conservation studios. One of the two atriums was refurbished, and many of the windows were boarded up to protect the collections. The atrium and windows will now be opened up to allow light back into the building, and enhance the visitor experience. The new windows will protect the collections, and we will save a lot of energy.
The museum will also comply with the international standard for lending works of art. This includes requirements for the indoor climate, fire protection, safety, accessibility, the environment and logistics. Visitor facilities will also be expanded. Both artworks and visitors will benefit from these major improvements. A number of special solutions will be required in order to preserve the building’s heritage value while simultaneously meeting all demands for modern technology.
We are proceeding carefully throughout the entire construction process to protect the building, fresco paintings by Carl Larsson and other irreplaceable craftsmanship.
Fredrik JohanssonSkanska Sweden+46 10 44 86 529
Mejl Fredrik Johansson
In partnership with the National Property Board of Sweden, we are working to create an environmentally friendly and green museum. The refurbishment will maximize energy-efficiency for Nationalmuseum, and the National Property Board of Sweden has decided to certify the building under the EU’s GreenBuilding Program. This means that the building’s energy consumption must be reduced by at least 25 percent.
The building’s cooling needs are met by locally produced deep water source cooling. Selected, energy-efficient electrical installations and the new windows will help to reduce energy consumption.
The renovation of Nationalmuseum also complies with the Silver-rating requirements of the Sweden Green Building Council, where possible. This environmental performance classification covers the areas of energy-efficiency, indoor environment and materials. The Sweden Green Building Council system is not currently adapted for the certification of older historic buildings.
During the demolition work, hazardous substances that were used in the past will be uncovered. We will decontaminate all sections that we can access, document the building materials we use and make sure that hazardous substances are removed.
Skanska has been assigned to renovate and refurbish Nationalmuseum in Stockholm. Skanska is the general contractor, in collaboration with the National Property Board of Sweden. Renovation of the main building includes new visitor facilities, raising the floor in the atriums, lowering the floor in the basement, new windows, the installation of elevators, and replacing all electrical installations. We will also upgrade the museum park and build a loading facility.
The project commenced in August 2014. We covered the sections that require protection and performed other preparatory work. It is essential that we protect this historic building from water, vibration, dust, subsidence and other elements of the construction process. This was followed by earthworks and foundation construction for the new loading facility.
“Since this is a waterfront site, we installed retaining walls and then excavated until we reached the groundwater table. Then we lowered the water table inside the walls to avoid having to excavate wet loads. At the same time, we sawed off 12 meters of the Annexe to make room for the loading facility,” says Pontus Lindeberg, Project Engineer.
The concrete structure in one of the atriums has been demolished to restore it to its original condition and allow the light back in again. The boarded-up windows in the main building will be reopened and replaced with more modern versions.
Modern demands on the indoor climate in museums are high. Preservation of the collections requires ideal temperatures and relative humidity. These levels are controlled by a system that is sensitive to variations caused by weather conditions and the number of visitors. We are working silently in the background to replace all installations in the building and significantly extend the climate-control system.
The Swedish National Heritage Board has set demanding requirements for how this should be implemented, which affect us in terms of the methods we choose, financial constraints and time. During the design stage, several special solutions were created that conceal the technology in smart ways.
The new and modern climate-control system can measure relative humidity and room temperatures, and maintain ideal levels. Skanska delivers a total solution. Fredrik Johansson, Project Manager, describes the challenges posed by the installation of a climate-control system:
“We are not permitted to change the layout of any of the rooms, and the size of shafts is highly restricted. Concealing so many space-consuming installations is not easy. We are reusing all vertical shafts. We are also installing a new duct system underneath the floors. This involves lifting the flooring, installing ducts and relaying the flooring.
Air will flow into the rooms through custom-made ceiling medallions in the beautiful domed ceilings. These medallions will also serve as ceiling sprinklers, thereby concealing two practical features in one beautiful detail. Such smart solutions will provide Nationalmuseum with an indoor climate that is ideal for both collections and visitors.
The floors in the atriums will be raised to improve accessibility at entry level. At the same time, the floor will be lowered in the basement, which was previously no more than standing height. New visitor facilities will be created in this area, including toilets, wardrobes, stroller parking and a picnic room. We will also build several new ventilation and electrical equipment rooms, as well as a large kitchen on this level.
Since the entire building stands upon rock, the project requires rock and soil excavation under the building. We are blasting very gently to prevent subsidence.
Nationalmuseum is a unique project in many ways. According to Fredrik Johansson,
“The chance to refurbish a property of this caliber only comes along once in a lifetime. The project group is very committed, and we all have great respect for the building. We also enlisted the services of an antiquarian expert. Respect for the building means that we are working even more intensively than usual to prepare each stage.”